Full system diagnostic
We test voltage, gas pressure, flame signal, and airflow with a multimeter and combustion analyzer. This takes 20 to 40 minutes and pinpoints the exact failure. You get a clear explanation before we quote the repair.
Licensed
Licensed & Bonded
Fully Insured
Insured & Bonded
24/7 Emergency
Same-Day Response
Warranty Backed
24+ Years Trusted
What our gas furnace repair includes
Every gas furnace repair includes a full diagnostic, the fix itself, and a safety check. We do not charge extra for a second opinion or a follow-up visit if the same issue returns within the warranty period.
Repair with OEM parts
We replace failed components with OEM or equivalent parts. Igniters, flame sensors, gas valves, circuit boards, capacitors, and blowers are stocked on our trucks. Most repairs are finished in one visit, usually within 2 to 4 hours.
Safety and carbon monoxide check
After the repair, we run a combustion analyzer to check carbon monoxide levels and verify proper venting. A furnace that heats but leaks CO is not safe. We test before we leave, every time, on every repair.
Filter and airflow check
We inspect your filter and blower for restrictions. A clogged filter can cause short cycling and uneven heating. If it is dirty, we will show you and replace it. This simple step prevents many repeat service calls.
1-year workmanship warranty
Our repair work is warrantied for 1 year. If the same part fails or the same issue returns, we come back and fix it at no charge. That is how we have operated since 2002, and it is why customers refer us to neighbors.
Gas furnace repair in Ohio: what it really involves
Gas furnace repair in Ohio means diagnosing and fixing the ignition, combustion, airflow, and control systems that keep your home warm. A proper repair starts with a combustion analyzer and multimeter to check gas pressure, flame signal, and voltage. From there we test the igniter, flame sensor, gas valve, and circuit boards. Most failures trace back to a dirty flame sensor or a weak igniter, but we verify every component before we call it fixed.
Ohio winters swing hard, and your furnace runs nonstop from November through March. That workload wears out capacitors, blowers, and heat exchangers faster than in milder states. If your furnace is short cycling or blowing cold air, the problem usually gets worse within days. We stock parts for Carrier, Trane, Lennox, Goodman, Rheem, York, Bryant, American Standard, Mitsubishi Electric, and Daikin so we can finish the repair on the first visit.
How our gas furnace repair process works
From your first call to the final safety check, here is exactly what happens when you book gas furnace repair with us.
01
Schedule
Call or book online — a real human picks up and confirms a 2-hour arrival window.
02
Diagnose
Licensed tech inspects on-site, then walks you through the cause and your options.
03
Fix
The job is completed to code and done right the first time — no shortcuts, no surprises.
04
Guarantee
Every job backed by a written workmanship warranty — and we stand behind it.
Tools and methods we use
Tools & Equipment
Combustion analyzer
Measures carbon monoxide, oxygen, and temperature in the flue gas. We use it after every repair to confirm the furnace burns safely and vents properly.
Multimeter
Tests voltage, continuity, and resistance on igniters, flame sensors, gas valves, and circuit boards. It pinpoints electrical failures in minutes instead of guessing.
Manifold gauge set
Checks gas pressure at the valve and burners. Correct pressure is critical for safe, efficient combustion. We adjust it to manufacturer specs on every repair.
Inspection camera
Lets us see inside the heat exchanger and ductwork without tearing anything apart. We use it to check for cracks, blockages, and debris that cause uneven heating.
Vacuum pump
Removes moisture and air from refrigerant lines when we service the AC side of a dual system. Clean lines mean efficient cooling and no repeat calls.
Torch kit
Used for brazing and soldering gas lines and refrigerant lines. We use it during replacements and major repairs to ensure leak-free connections.
Methods & Standards
NATE-certified diagnostic protocol
Our techs follow a NATE-standard sequence: verify power, check thermostat call, test ignition, measure gas pressure, and analyze combustion. This step-by-step method catches the root cause instead of replacing parts by guesswork.
EPA Section 608 compliance
Any refrigerant handling follows EPA Section 608 rules. We recover, recycle, and recharge refrigerant legally. This matters when a furnace repair involves the AC coil or a dual-fuel system.
OSHA safety standards
Every job follows OSHA safety certification guidelines for gas, electrical, and tool handling. We lock out power, test for leaks, and wear PPE. Safety is not optional on a gas appliance.
Code-correct venting and gas work
We follow Ohio mechanical codes and manufacturer specs for venting, gas piping, and clearances. A repair that ignores code can fail inspection or create a CO hazard. We do it right the first time.
When to call for gas furnace repair
01
Your furnace quits on the coldest night of the year and your house drops below 60 degrees.
What we do: Call our 24/7 emergency line. We dispatch the nearest tech and prioritize no-heat calls. We carry igniters, flame sensors, and gas valves on every truck, so most emergency repairs are finished in one visit.
→ You get heat back the same night, often within 2 to 4 hours of your call. No hotel, no frozen pipes.
02
Your furnace runs but only blows cold air, and your energy bill spiked last month.
What we do: We diagnose the flame sensor, igniter, and gas valve with a multimeter and combustion analyzer. A dirty flame sensor is the most common cause, and cleaning or replacing it takes about 90 minutes.
→ Your furnace lights reliably again, and your gas bill drops back to normal. You stop paying to run a blower that never heats.
03
Your furnace short cycles every 10 minutes, and some rooms never get warm.
What we do: We check airflow, filter condition, thermostat settings, and flame signal. A clogged filter or a failing blower capacitor is often the cause. We fix the root issue, not just the symptom.
→ The furnace runs full cycles, rooms heat evenly, and the wear on your blower and heat exchanger drops. You avoid a premature replacement.
04
You smell gas near the furnace or your carbon monoxide detector goes off.
What we do: Leave the house and call us from outside. We treat gas and CO calls as top priority. A tech checks the gas valve, burners, venting, and heat exchanger with a combustion analyzer.
→ We find and fix the leak or blockage, then verify safe CO levels before you return. Your family is protected, and the furnace runs safely.
How gas furnace repair works across Ohio
Ohio winters are long and cold, with temperatures dropping below 20 degrees for weeks at a time. That kind of cold pushes furnaces hard, and it exposes weak parts fast. Most homes here have forced-air gas furnaces, and many are 15 to 25 years old. We see a lot of cracked heat exchangers, failed igniters, and short cycling once the first hard freeze hits. Our techs know the building stock, from older homes in New Carlisle and Jackson to newer builds in Logan and Kenton. We also know the local codes and permit requirements that vary by county. When you need gas furnace repair in Ohio, we route the closest tech to your address. That means faster response without sacrificing the parts and training of a statewide team. We handle everything from a $180 flame sensor to a full heat exchanger replacement.
Neighborhoods We Serve
-
New Carlisle
Older housing stock means more original ductwork and undersized returns. We often find airflow problems that cause short cycling and uneven heating in these homes.
-
Jackson
Many homes here rely on propane or natural gas furnaces that run nonstop in January. We see a high rate of igniter and flame sensor failures during cold snaps.
-
Logan
Rural properties around Logan often have long duct runs and poorly sealed joints. We check duct sealant and static pressure as part of every repair.
-
Kenton
A mix of older farmhouses and newer builds. Older furnaces here often need heat exchanger inspections, while newer ones need control board diagnostics.
Local Conditions We Plan For
-
Sustained temperatures below 20 degrees
Furnaces run constantly, which wears out capacitors, blowers, and igniters faster. We stock these parts on every truck because they fail most often in a deep freeze.
-
Older housing with original ductwork
Leaky or undersized ducts cause uneven heating and short cycling. We check static pressure and duct sealant during the diagnostic to catch airflow problems.
-
Power outages and surges
Storms knock out power and fry control boards. We replace circuit boards and capacitors after outages, and we test the whole system to make sure nothing else failed.
No heat in New Carlisle fixed same day
Common gas furnace problems we solve
These are the calls we get most often from Ohio homeowners. If your furnace is doing any of these, call us before the problem gets worse.
Problem
Furnace not heating
Your house gets cold fast, and pipes can freeze within hours in a hard Ohio freeze. A no-heat call is an emergency, not a wait-until-Monday problem.
Our Fix
We diagnose the ignition, gas valve, and control board with a multimeter. Most no-heat calls are fixed the same day, often within 2 to 4 hours. We carry the parts to get you warm on the first visit.
Problem
Furnace blowing cold air
Cold air means the blower runs but the burners never light. This wastes electricity and leaves you freezing. It often points to a dirty flame sensor or a failed igniter.
Our Fix
We clean or replace the flame sensor, test the igniter, and verify gas pressure. This repair usually takes 90 minutes and costs $180 to $300. You get heat back the same day.
Problem
Furnace short cycling
Short cycling wears out the blower, igniter, and heat exchanger faster. It also raises your gas bill and leaves rooms unevenly heated. Ignoring it leads to a bigger repair bill.
Our Fix
We check airflow, thermostat settings, and flame signal to find the cause. A clogged filter or dirty sensor is often the culprit. We fix it and verify the furnace runs a full cycle before we leave.
Problem
Furnace making loud noises
Banging, squealing, or rumbling sounds mean a mechanical problem. A delayed ignition can crack the heat exchanger, which is a carbon monoxide risk. Do not ignore loud furnace noises.
Our Fix
We inspect the burners, blower, and heat exchanger with an inspection camera. If the heat exchanger is cracked, we tell you and show you the evidence. We repair what is safe to repair and replace what is not.
Why Ohio homeowners call us for furnace repair
We fix gas furnaces fast, explain what failed, and leave your system running safely. Here is what you get when you call us.
-
Same-day heat restoration
Most gas furnace repairs are completed in 2 to 4 hours on the first visit. We carry igniters, flame sensors, gas valves, and circuit boards on every truck, so you are not waiting days for a part. If your furnace is not heating, we prioritize your call and get a tech to your door fast.
-
Code-correct, safe repairs
We follow Ohio mechanical codes and manufacturer specs on every job. That means proper gas pressure, correct venting, and a combustion analyzer check before we leave. A furnace that runs but leaks carbon monoxide is not fixed. We test for safety, not just warmth, so your family is protected all winter.
-
Straight pricing, no surprises
You get a clear price before we start. Typical gas furnace repairs in Ohio run $180 to $650 depending on the part and labor. We do not upsell you into a new furnace when a $220 igniter solves the problem. If a replacement makes more sense, we show you the numbers and let you decide.
-
24/7 emergency response
Furnaces fail at 2 a.m. on the coldest night of the year. Our emergency line is open around the clock, and we dispatch techs across Ohio for no-heat calls. We have been doing this since 2002, so we know which failures cannot wait until morning. Call and we will get you on the schedule.
Licensed, certified, and reviewed
Licensed & Certified
- NATE certification — issued by North American Technician Excellence
- EPA Section 608 certification — issued by U.S. Environmental Protection Agency
- OSHA safety certification — issued by Occupational Safety and Health Administration
- State HVAC license — issued by State of Ohio
Verified Reviews
Google ★★★★★4.9
Fast, honest, and fair. Our furnace died on a Sunday and they had a tech out by noon. He found a bad igniter, had the part on the truck, and we had heat within an hour. The price was exactly what he quoted. I will not call anyone else.
Yelp ★★★★★4.8
I manage rentals in Logan and Kenton. Emergency Furnace Repair is my go-to for no-heat calls. They show up when they say they will, fix the problem, and send a clear invoice. My tenants are happy and my pipes have not frozen once.
BBB A+
Professional from start to finish. The tech explained what failed, showed me the dirty flame sensor, and cleaned it. He also checked the heat exchanger and carbon monoxide levels. No upsell, just a solid repair at a fair price.
24 years of gas furnace repair experience
Emergency Furnace Repair has been fixing gas furnaces in Ohio since 2002. Our technicians hold NATE certification and EPA Section 608 certification, and they train on new Carrier, Trane, Lennox, and Daikin systems every year. We have repaired thousands of furnaces across Ohio, from 20-year-old Goodman units to modern high-efficiency Bryant models. That volume means we have seen every failure mode: cracked heat exchangers, failed igniters, stuck gas valves, and control boards fried by power surges. We diagnose fast because we have seen it before.
- NATE-certified technicians with an average of 12 years on gas furnace systems.
- EPA Section 608 certification for safe refrigerant and combustion handling.
- OSHA safety certification on every job site, every visit.
- State HVAC license and local permits pulled for replacements and major repairs.
- Factory training on Carrier, Trane, Lennox, Goodman, Rheem, York, Bryant, American Standard, Mitsubishi Electric, and Daikin.
Gas furnace repair in these Ohio cities
We provide gas furnace repair across Ohio, with same-day service in most areas. Our techs know the local housing stock, climate, and code requirements. Whether you are in a small town or a busy suburb, you get the same licensed techs, stocked trucks, and upfront pricing.
New Carlisle
New Carlisle homes often have older ductwork and furnaces that need airflow checks. We repair igniters, flame sensors, and blowers, and we verify combustion safety on every visit.
Jackson
Jackson sees hard freezes that stress gas furnaces. We stock igniters and gas valves on our trucks and offer same-day no-heat repair, usually within 2 to 4 hours of your call.
Logan
Logan properties often have long duct runs and rural gas systems. We check static pressure, duct sealant, and heat exchanger integrity as part of every gas furnace repair.
Kenton
Kenton has a mix of farmhouses and newer builds. We diagnose control boards, blowers, and heat exchangers, and we carry the parts to finish most repairs in one visit.
What Ohio homeowners say
Real experiences from customers who chose our Gas furnace repair services.
“Our furnace quit on a Friday night in January. Emergency Furnace Repair had a tech at our door by 8 a.m. Saturday. He found a failed igniter, had the part on his truck, and we had heat by 10. The price was exactly what he quoted. No games, just a fast fix.”
M
Mark R.
Homeowner, New Carlisle
“We called three companies and only Emergency Furnace Repair answered on a Sunday. The tech diagnosed a dirty flame sensor in 20 minutes and cleaned it. He also showed me how to change my filter and checked the heat exchanger for cracks. Honest work at a fair price.”
D
Dana W.
Homeowner, Jackson
“I manage six rentals in Logan and Kenton. When a tenant calls with no heat, Emergency Furnace Repair is who I call. They handle the repair, send me the invoice, and never leave a tenant without heat overnight. They have saved me from frozen pipes more than once.”
T
Tom B.
Property Manager, Logan
Frequently Asked Questions
Real answers to the questions we hear most often from local homeowners and property managers.
How much does gas furnace repair in Ohio cost?
Most gas furnace repairs in Ohio cost $180 to $650, including parts and labor. A flame sensor or igniter replacement usually runs $180 to $300. A blower motor or circuit board can push $450 to $650. Emergency calls after hours may add a dispatch fee. We give you the exact price before we start, so there are no surprises.
Why is my furnace blowing cold air?
A furnace blowing cold air usually means the flame sensor is dirty, the igniter has failed, or the gas valve is not opening. It can also be a thermostat set to ON instead of AUTO, which runs the blower without heat. We test all of these in 20 to 40 minutes and fix the root cause, not just the symptom.
How long does a gas furnace repair take?
Most gas furnace repairs take 2 to 4 hours from arrival to finished. Simple fixes like a flame sensor or igniter are done in 90 minutes. Control board or blower replacements can take 3 to 4 hours. We carry the parts on our trucks, so the job is usually completed the same day you call.
Can you fix a furnace that will not turn on at all?
Yes. A furnace that will not turn on is usually a power, thermostat, or safety switch issue. We check the breaker, door switch, flame sensor, and control board with a multimeter. If the board is dead, we replace it. Most no-power calls are resolved in one visit, often within 2 hours.
Related Services
Furnace Not Heating Repair
When your furnace runs but does not heat, the issue is usually ignition or gas flow. We diagnose and repair no-heat problems across Ohio, often the same day. This is the most common call we get from November through March.
View Furnace Not Heating RepairEmergency Furnace Repair
No heat at 2 a.m. is an emergency. Our 24/7 line dispatches a tech to your door for after-hours furnace failures. We prioritize homes with infants, elderly residents, or frozen pipes. Call and we will get you on the schedule fast.
View Emergency Furnace RepairFurnace Installation
If your furnace is beyond repair, we install new Carrier, Trane, Lennox, and Goodman systems. We handle permits, venting, and gas line connections. Installation typically takes 4 to 8 hours, and we haul away the old unit.
View Furnace InstallationFurnace Replacement
A cracked heat exchanger or a 20-year-old furnace often costs more to repair than replace. We walk you through efficiency ratings, sizing, and rebates. Most replacements are completed in one day, and we dispose of the old equipment.
View Furnace ReplacementFurnace Maintenance
Annual maintenance prevents 80% of mid-winter breakdowns. We clean the flame sensor, check gas pressure, inspect the heat exchanger, and replace filters. A maintenance visit takes 60 to 90 minutes and keeps your warranty valid.
View Furnace MaintenanceFurnace Tune-Up
A tune-up goes beyond a filter change. We adjust the burners, test the igniter, lubricate the blower, and verify temperature rise. It is the cheapest way to avoid a no-heat call in January. Book it in the fall before the rush.
View Furnace Tune-UpContact Our Ohio Team
Call us any hour, any day. Our dispatchers answer live, give you a realistic arrival window, and route the closest truck to your address. If you prefer, send an email and we will reply the same business day with scheduling options.
Emergency Furnace Repair
-
Phone
+16149260837 -
Address
875 Freeway Dr N, Columbus, OH 43229
-
Hours
Mon–Fri: 7AM – 7PM
Sat: 8AM – 4PM
Sun: Emergency Only
24/7 Emergency Available